Putting an SD card into a GoPro HERO 10 is a simple process that only takes a few minutes. With the right steps, you’ll have your SD card installed and ready to capture photos and videos on your GoPro HERO 10 in no time.
What You Need
Before you can insert an SD card into your GoPro HERO 10, make sure you have the following:
- GoPro HERO 10 camera
- MicroSD card (recommended 128GB or above)
The GoPro HERO 10 requires a microSD card to store your photos and videos. GoPro recommends using brand name microSD cards that are Class 10 or UHS-I/UHS-III rated. These cards have fast enough write speeds to handle the high resolution photos and videos captured by the HERO 10.
How to Insert the MicroSD Card
Inserting the microSD card into your GoPro HERO 10 only takes a few simple steps:
- Turn off your GoPro HERO 10 camera.
- Locate the microSD card slot on the right side of the camera. It’s next to the battery compartment door.
- Open the microSD card slot door by sliding it downward. This will reveal the microSD card slot inside.
- Hold your microSD card with the label facing the front of the camera.
- Insert the microSD card into the card slot until it clicks into place and is secure.
- Close the microSD card slot door.
Once the microSD card is inserted properly, you can power on your GoPro HERO 10 and start using the card to record videos or capture photos.
How to Remove the MicroSD Card
When you want to remove the microSD card from your GoPro HERO 10, follow these steps:
- Turn off the camera.
- Slide the microSD card slot door downward to open it.
- Gently press down on the microSD card to release it from the slot.
- Carefully pull the microSD card out of the card slot.
- Close the microSD card slot door.
To avoid damaging files on the SD card, always make sure your GoPro is powered off before removing the card. Inserting and removing the card with the camera turned on risks corrupting your files.
Maximizing Your microSD Card Storage
To get the most out of your GoPro HERO 10’s microSD card storage, follow these tips:
- Use a microSD card with at least 128GB of storage space to provide plenty of room for high resolution videos and photos.
- Set your GoPro to delete files automatically when the card becomes full. This prevents your camera from stopping recording sessions when it runs out of storage space.
- Offload files from your microSD card to a computer or external hard drive regularly. This frees up storage space on the card for new content.
- Format your microSD card in the GoPro every few months. Formatting helps prevent performance issues and glitches.
- Avoid removing the microSD card when the camera is on. Only insert and remove the card when the GoPro is powered off.
Tips for Adding MicroSD Storage
Need even more storage space for your GoPro HERO 10 footage and images? Consider these options:
- Purchase additional microSD cards. Rotate between multiple cards to extend your shooting capacity.
- Invest in higher capacity microSD cards up to 512GB.
- Use an external USB-C flash drive to offload files from your microSD card in the field.
- Transfer files to an external SSD drive that has 1TB or more storage capacity.
With the ability to use high capacity and external storage devices, you can record hours of stunning 4K video and time lapse footage with the GoPro HERO 10 without worrying about running out of space.
Troubleshooting MicroSD Card Issues
If your GoPro HERO 10 is having problems detecting or using the files on your microSD card, try these troubleshooting steps:
- Reformat the microSD card in the GoPro. This will wipe the card and fix most file errors.
- Try using a different, known good microSD card. The card itself may be defective or damaged.
- Check that the card meets GoPro’s recommendations for minimum read/write speeds.
- Clean the contacts on the microSD card with a soft cloth. Dirty contacts can interrupt the connection.
- Update your GoPro HERO 10 software. An outdated version may have card compatibility issues.
- Remove and reinsert the microSD card to make sure it’s properly connected.
If errors persist after troubleshooting, the microSD card itself may be faulty and need replacement.
microSD Card FAQs
Here are answers to some frequently asked questions about using microSD cards in the GoPro HERO 10:
Does the GoPro HERO 10 come with a microSD card?
No, the GoPro HERO 10 does not include a microSD card in the box. You will need to purchase one separately.
Which brand of microSD card should I use?
GoPro recommends high performance cards from brands like SanDisk, Lexar, or Samsung.
What size microSD card do I need?
At minimum, use a 128GB card for the GoPro HERO 10. Higher capacities like 256GB or 512GB are recommended for extensive shooting in resolutions like 5K.
Can I use just any microSD card?
No, you need a microSD card rated Class 10 or higher to handle the data rates of high resolution footage from the HERO 10.
How do I format the microSD card?
You can format your microSD card directly in the GoPro HERO 10 camera using the ‘Format SD Card’ option in the settings menu.
Conclusion
Installing a microSD card into your new GoPro HERO 10 is a quick and simple process that will unlock the camera’s full potential for capturing stunning photos and crystal clear videos. Choosing the right high capacity and high speed card ensures reliable performance for your GoPro. With just a few easy steps to insert and remove the card, you’ll have your HERO 10 up, running, and ready for action-packed adventures in no time.